Description AUTOMACH Power Carver Model WCS-100 Authorized Service, Repair Center (U.S.A.) for Automach.* Continuous carving of hard wood, such as ebony, rosewood (for professional). * For Sculpture Carving Cutting Polishing Drilling * You can carve with one third of force at 3 – 5 times greater speed, when comparing with manual carving, and therefore you won,t get tired.Rated voltage AC 100/120V, 50/60Hz * The grabbing portion is as small as 30mm in diameter., so that you can handle this tool like a manual carving knife. * The number of blade reciprocation has become 12,000 per minute which is 2 times greater than the conventional model. Along with 1.5mm(1/16inch) reciprocation width, the cut amount has increased by 30 – 40% * The flexible shaft (power carrying wire) has become softer and lighter, so that you can use the tool more easily. * Professionals and woodworking people admire that finished surface is finer, when compared with finished surface by manual carving. Optional Rotary Head available.NOT INCLUDED WITH SET ABOVE * Type RH-102 Rotary Head —– RPM of WCS-100 with RH-102 Rotary Head —– RPM4000. —– When you need rotation instead of reciprocation, just connect RH-102 to the flexible shaft of a Wood Carver. The Wood Carver becomes a rotary tool. Chucking capacity is up to 6.5mm, 1/4″. Optional* Type WG-200 Honing Stone NOT INCLUDED WITH SET ABOVE Middle meshes has 4 kinds of channels on surface. Available both water and oil. Related
